Skip to content
NewMS Lattice found both sealed targets blind, in 32 minutes, for under 20 cents.See the proof →
Advancing Bits to Master Atoms

Thermal barrier coatings.
Hotter engines, protected parts.

Every degree a turbine gains is efficiency. Name the temperature, the expansion and the life you need.

Engineering cross-section of a curved turbine blade showing a pale satin columnar ceramic topcoat, a thin cobalt-blue bond line and a cool dark matte superalloy base beneath.Engineering cross-section of a curved turbine blade showing a pale satin columnar ceramic topcoat, a thin cobalt-blue bond line and a cool dark matte superalloy base beneath.
  • Gas turbines
  • Jet engines
  • Ceramic-matrix composite parts

The material groups.

Each group brings its own structures and chemistry to the search.

  • Stabilized zirconia

    The industry standard, pushed further.

  • Rare-earth zirconates

    Lower thermal conductivity.

  • High-entropy oxides

    Stronger insulation.

  • Environmental barrier coatings

    Protection for ceramic-matrix composites.

What you can aim for.

Set the properties that matter. Say what a candidate must meet and what it should push for, with cost and supply in view.

  • Low thermal conductivity
  • Thermal-expansion match
  • Toughness
  • Sintering resistance
  • Phase stability at temperature

Starting points.

Start from a proven preset, or set your own targets.

  • Ultra-low thermal conductivity

    The strongest insulation the domain allows.

  • Next-generation turbines

    Coatings for hotter, more efficient turbines.

  • EBC for CMC

    Environmental barrier coatings for ceramic-matrix composites.

Four modes, in every domain.

Search from the target alone, improve a material you have, or watch the engine find sealed targets blind.

Every candidate, with its record.

Each candidate comes ranked against your targets, with its estimated properties and their uncertainty, the checks it passed and a structure file to export, ready for your lab.

Stop guessing which crystal to make. Ask for it.

Tell us the domain and what the material must do. License MS Lattice for your team, or let Norck take the discovery all the way to finished parts.