Skip to content
Advancing Bits to Master Atoms

Wide-bandgap semiconductors.
Past silicon, for power, RF and deep UV.

A wide-bandgap semiconductor campaign finds crystals for power switches, RF amplifiers and deep-UV devices that go beyond what silicon can do.

A dense crystal of satin silver and cobalt-blue spheres standing on a thin polished graphite wafer on a low stepped plinth.A dense crystal of satin silver and cobalt-blue spheres standing on a thin polished graphite wafer on a low stepped plinth.
  • Power switching
  • RF power amplifiers
  • Deep-UV LEDs and detectors

Why this domain matters to your work.

Wide-bandgap semiconductors let power, RF and optical devices go where silicon stops. A wider band gap lets a device block higher voltages in a thinner layer, switch faster with lower losses and run hotter, which is why silicon carbide and gallium nitride now drive electric-vehicle inverters, fast chargers and RF power amplifiers. The widest gaps, in aluminium-rich nitrides, boron nitride and gallium oxide, reach into the deep ultraviolet for LEDs and solar-blind detectors.

Every figure that makes these crystals attractive comes with one that holds them back. Gallium oxide has a very wide gap and can be grown from the melt, but it conducts heat poorly and resists p-type doping. Diamond and boron nitride promise the most and are the hardest to dope and grow. Wider gaps generally make doping harder and mobility lower, and gallium and indium carry supply risk. A good power switch has to balance breakdown, mobility, heat removal and dopability at a cost a device line can carry.

A campaign lets you specify the band gap, the device class (power, RF or deep UV), the figure of merit you need and the elements you can source. You receive ranked gallium oxide, nitride, boron nitride and group-IV candidates with estimated band gap, Baliga figure of merit, electron mobility, thermal conductivity, dopability and cost. These are screening estimates for the bulk crystal. Doping, defects, film quality, device breakdown, contacts and reliability are not predicted and need growth and device testing.

The material families this domain searches.

Each family brings its own structures and chemistry to the search. A campaign can search one of them or compare several under the same targets.

  • β-gallium oxide

    Ultra-wide-gap gallium oxide and its aluminum and indium alloys, chosen for high-voltage power devices on substrates that can be grown from the melt.

  • Wurtzite AlGaN

    Gallium nitride and its aluminum alloys, chosen for GaN power and RF transistors and for AlGaN emitters in the deep ultraviolet.

  • Boron nitride

    Cubic and hexagonal boron nitride, with the widest gaps in the domain, explored by teams pushing toward the highest voltages and shortest UV wavelengths.

  • Group-IV crystals

    Silicon carbide, and diamond doped with boron, chosen for established power devices and for the best heat removal of any semiconductor.

The properties a campaign can aim for.

Choose the properties that matter to your work. For each one, say whether a candidate must meet it or should push it as far as it goes, with cost and supply always in view.

  • Band gap from 3 to 6 eV
  • Baliga figure of merit
  • Electron mobility
  • Thermal conductivity
  • Dopability
  • Cost and supply risk

Starting points for a campaign.

Each starting point sets up a campaign for a common goal in this domain. Begin from one and adjust its targets, or set your own from the start.

  • Power switching

    Suits power-electronics teams, ranking SiC, GaN and Ga₂O₃-class crystals for efficient high-voltage switches.

  • RF power

    Suits RF amplifier designers, searching for GaN-class transistor channels with high electron mobility and good heat removal.

  • Deep-UV optoelectronics

    Suits UV device makers, searching aluminum-rich nitrides, boron nitride and gallium oxide for UV emitters and solar-blind detectors.

  • Low-cost power semiconductors

    Suits teams avoiding gallium and indium supply risk, ranking SiC, diamond and boron nitride for power devices without either metal.

What you specify, what you receive and where the figures stop.

MS Lattice hands your lab a shortlist to make and test. Its figures are screening estimates and calculations, not measurements of the new material, and each domain says where they stop.

  • You specify

    The band gap, the device class (power, RF or deep UV), the figure of merit you need and the elements you can source.

  • You receive

    Ranked gallium oxide, nitride, boron nitride and group-IV candidates, with estimated band gap, Baliga figure of merit, electron mobility, thermal conductivity, dopability and cost.

  • Before you rely on it

    The figures are screening estimates for the bulk crystal. Doping, defects, film quality, device breakdown, contacts and reliability are not predicted and need growth and device testing.

The same four modes work in every domain.

Search from your targets alone, improve a material your team already uses, or watch the engine reach known materials, with the targets as guides or sealed away, to see how well it searches.

Every candidate arrives with its record.

Each candidate comes ranked against your targets, with its estimated properties and their uncertainty, the checks it passed and a structure file to export, ready for your lab.

Questions teams ask about this domain.

Which device classes does the wide-bandgap semiconductors domain serve?

Three: power switching, RF power and deep-UV optoelectronics. Starting points match them: SiC, GaN and Ga₂O₃-class power switches; GaN-class transistor channels for RF; and aluminium-rich nitrides, boron nitride and gallium oxide for UV emitters and solar-blind detectors. A fourth, low-cost power semiconductors, searches SiC, diamond and boron nitride without gallium or indium.

Can MS Lattice keep gallium and indium out of wide-bandgap semiconductors candidates?

Yes. Name the elements you can source in your brief, and candidates built from anything else stay off the shortlist. The low-cost power semiconductors starting point already does this, ranking silicon carbide, diamond and boron nitride without gallium or indium. Every candidate carries its estimated cost and supply risk beside its band gap, Baliga figure of merit, mobility and thermal conductivity.

How should we read dopability in MS Lattice’s wide-bandgap semiconductors results?

Dopability is a screening estimate for the bulk crystal, set beside band gap, figure of merit, mobility and thermal conductivity so you can see the trade each candidate makes. It is not a doping result. Achieved carrier levels, defects, film quality, device breakdown, contacts and reliability are not predicted and need growth and device testing.

Have a materials target? Tell us what it must do.

Share the material domain, the properties you need and the limits the material must respect. We will show you how MS Lattice would approach it through Norck, from a ranked shortlist for your own lab all the way to finished parts.