Skip to content
Advancing Bits to Master Atoms

Optical materials.
Windows, electrodes and scintillators.

An optical materials campaign finds crystals for infrared windows, transparent electrodes and scintillators, the crystals that turn radiation into flashes of light.

A clear glass block holding an ordered lattice of silver and cobalt-blue spheres, a thin blue beam of light passing straight through it.A clear glass block holding an ordered lattice of silver and cobalt-blue spheres, a thin blue beam of light passing straight through it.
  • Thermal-imaging optics
  • Transparent electrodes
  • Gamma spectroscopy and PET

Why this domain matters to your work.

Optical materials decide what a system can see and how cleanly it sees it, from the window in front of a thermal camera to the transparent electrode on a display and the crystal that turns a gamma ray into a flash of light. ZnS, ZnSe, GaP and germanium carry infrared optics, fluoride and alkali-halide windows reach from the ultraviolet to the far infrared, ITO and doped ZnO and SnO₂ conduct while staying clear, and halide and cerium-garnet scintillators serve gamma spectroscopy, security portals and PET.

Each family trades one property for another. The halides with the widest transmission tend to absorb moisture and need a dry enclosure, while tougher windows transmit a narrower band. Transparent conducting oxides must balance film resistivity against visible transparency, and indium carries cost and supply risk. Scintillators have to combine light yield, fast timing and stopping power, and the brightest crystals are not always the fastest or the easiest to grow. Toxic compounds solve some of these problems at a price many teams will not pay.

A campaign lets your team name the wavelength band, the film resistivity, or the light yield and timing of a scintillator, along with your limits on moisture and cost. You receive ranked infrared windows, transparent conducting oxides and scintillators with estimated transmission range, refractive index, moisture resistance, film resistivity, light yield, decay time and cost, with toxic compounds such as GaAs, CdTe and the thallium-activated halides left out. The figures are screening estimates. Absorption spectra, carrier mobility, luminescence spectra, afterglow and energy resolution are measured on grown crystals and deposited films.

The material families this domain searches.

Each family brings its own structures and chemistry to the search. A campaign can search one of them or compare several under the same targets.

  • Zincblende and diamond windows

    ZnS, ZnSe, GaP and germanium, chosen for infrared optics such as the windows and lenses in front of thermal cameras.

  • Fluoride and alkali-halide windows

    Fluoride and halide crystals that transmit from the ultraviolet to the far infrared, chosen for the widest wavelength range, often behind a dry enclosure.

  • Transparent conducting oxides

    ITO, doped ZnO and doped SnO₂, chosen for thin films that conduct electricity while letting visible light through.

  • Inorganic scintillators

    Halides and cerium garnets that turn radiation into light, chosen for gamma spectroscopy, security portals and PET scanners.

The properties a campaign can aim for.

Choose the properties that matter to your work. For each one, say whether a candidate must meet it or should push it as far as it goes, with cost and supply always in view.

  • Infrared cutoff, film resistivity or light yield
  • Moisture resistance
  • Visible transparency
  • Scintillation timing
  • Stopping power
  • Cost and supply risk

Starting points for a campaign.

Each starting point sets up a campaign for a common goal in this domain. Begin from one and adjust its targets, or set your own from the start.

  • Thermal-imaging windows and lenses

    Suits thermal camera makers, searching for uncoated 8–12 µm windows and domes that transmit well and resist moisture.

  • Far-infrared and FTIR windows

    Suits infrared spectroscopy instrument makers, ranking halide windows for far-infrared and FTIR work behind a dry enclosure.

  • Transparent electrodes

    Suits display, touch-panel and solar-cell teams, balancing film resistivity against visible transparency and the supply of indium.

  • Gamma-spectroscopy scintillators

    Suits detector makers for spectroscopy and security portals, searching for bright crystals with a high light yield.

  • Fast-timing scintillators

    Suits PET scanner developers, searching for fast crystals suited to time-of-flight PET, which locates each event by its timing.

What you specify, what you receive and where the figures stop.

MS Lattice hands your lab a shortlist to make and test. Its figures are screening estimates and calculations, not measurements of the new material, and each domain says where they stop.

  • You specify

    The wavelength band, the film resistivity, or the light yield and timing of a scintillator, your limits on moisture, and cost.

  • You receive

    Ranked infrared windows, transparent conducting oxides and scintillators, with estimated transmission range, refractive index, moisture resistance, film resistivity, light yield, decay time and cost.

  • Before you rely on it

    The optical figures are screening estimates, not calculations. Absorption spectra, carrier mobility, luminescence spectra, afterglow and energy resolution are not predicted, and toxic compounds such as GaAs, CdTe and the thallium-activated halides are left out.

The same four modes work in every domain.

Search from your targets alone, improve a material your team already uses, or watch the engine reach known materials, with the targets as guides or sealed away, to see how well it searches.

Every candidate arrives with its record.

Each candidate comes ranked against your targets, with its estimated properties and their uncertainty, the checks it passed and a structure file to export, ready for your lab.

Questions teams ask about this domain.

Which optical materials preset fits an 8–12 µm thermal-imaging window?

Thermal-imaging windows and lenses, which searches for uncoated 8–12 µm windows and domes among the zincblende and diamond-structure crystals such as ZnS, ZnSe, GaP and germanium. Candidates are ranked on infrared cutoff, moisture resistance, refractive index and cost. For far-infrared and FTIR work behind a dry enclosure, the halide-window preset is the better start.

Can an optical materials campaign find a transparent electrode with less indium?

Yes. The transparent electrodes preset searches ITO, doped ZnO and doped SnO₂ for display, touch-panel and solar-cell electrodes. Set cost and supply risk as a requirement, and push film resistivity and visible transparency as preferences, as far as they go without breaking it. Carrier mobility is not predicted, so the deposited film decides the final resistivity.

How does the optical materials domain rank scintillators?

On light yield, scintillation timing, stopping power, moisture resistance and cost, among halide and cerium-garnet crystals. The gamma-spectroscopy preset looks for bright crystals for spectroscopy and security portals, and the fast-timing preset for crystals suited to time-of-flight PET. Luminescence spectra, afterglow and energy resolution are not predicted and are measured on grown crystals.

Why are GaAs and CdTe missing from optical materials shortlists?

Toxic compounds are left out of the domain, and that includes GaAs, CdTe and the thallium-activated halides. Every candidate your team receives comes from the zincblende and diamond windows, fluoride and alkali-halide windows, transparent conducting oxides and inorganic scintillators, so a shortlist does not hand your lab a handling problem it did not ask for.

Have a materials target? Tell us what it must do.

Share the material domain, the properties you need and the limits the material must respect. We will show you how MS Lattice would approach it through Norck, from a ranked shortlist for your own lab all the way to finished parts.